Caution: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.
Notice: When servicing electrochromic glass that is broken, or if glass breaks during servicing, be cautious not to spill electrochromic fluid onto vehicle. Doing so will cause damage to the vehicle.
| 2.1. | Push mirror glass bottom outboard (1) corner, furthest away from the vehicle door, as far as possible into the mirror housing. |
| 2.2. | Place fingers tips behind the top inboard edge (2) corner, closest to the vehicle door. |
| 2.3. | Pull the mirror glass with light pressure until the glass comes loose. |
| 2.4. | Holding the mirror face, disconnect the electrical connectors from the back of the mirror. |
| 2.1. | Holding the mirror face, connect the electrical connectors to the back of the mirror. |
| 2.2. | Position the mirror face to the motor retainer tabs. |
| 2.3. | Position the hand in the center of the mirror face. |
| 2.4. | Apply light pressure to the face. |
| 2.5. | Push downward and inward to lock in place. |
| 2.6. | Inspect the mirror face for proper operation. |