GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2008 🢒 OUTLOOK - AWD 🢒 Body Systems 🢒 Lighting 🢒 Parking and Turn Signal Lamp Bracket Replacement

Parking and Turn Signal Lamp Bracket Replacement OUTLOOK


Object Number: 1854912 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
  2. Disconnect the main electrical harness connector at the park and front fog lamp bracket assembly.

1

Front Bumper Fascia Brace Screw

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Park and Front Fog Lamp Bracket Screws (Qty: 2)

Tighten
2 N·m (18 lb in)

3

Park and Front Fog Lamp Bracket

Procedure

    • Remove the bracket assembly from the front end upper tie bar support.
    • Remove and transfer the park turn signal lamp assembly. Refer to Parking and Turn Signal Lamp Replacement .
    • Remove and transfer the fog lamp assembly, (if equipped). Refer to Front Fog Lamp Replacement .
    • Remove and transfer the electrical jumper harness.