Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Radio Assembly Replacement

1

Panel, I/P Accessory Trim

2

Screw, Radio Assembly (Qty: 4)

Tighten
2 N·m (18 lb in)

3

Radio Assembly

Refer to Control Module References for programming and setup information.

Tip

1. Loosen the HVAC control enough to let the radio clear the I/P.
2. Disconnect the antenna cable.
3. Disconnect the electrical connector.
4. Perform the radio setup procedure when replacement is complete. Refer to Radio Setup .