Tools Required

J 44866 Support Bushing Remover/Installer

Important: Remove the bushing only if damaged or worn out.

Important: Use the high pressure lube supplied with the tool.

1. Install J 44866 . Tighten the nuts in order to force out the bushing.




Important: The bushing has 2 slots molded into the rubber section. The slots are used to control vibration and must be installed in the following positions:

•	4-Cylinder Vehicles -- Align the slots in the 3 o'clock and 9 o'clock position (2).

•	6-Cylinder Vehicles -- Align the slots in the 6 o'clock and 12 o'clock position (1).

2. Install J 44866 . Tighten the nuts in order to force the bushing in.