Tools Required

J 35268-A Camshaft/Front Main Seal Installer

1. Remove the crankshaft balancer pulley.
2. Using a seal removal tool or screwdriver, remove the oil seal from the front cover.

•	Clean the seal bore and oil drain back passage way.

•	Ensure that the oil drain back passage is free of RTV or debris.




3. Install a new oil seal using the J 35268-A

Important: Always ensure that the oil pump cover is properly supported when installing.

•	Ensure that the font main oil seal is fully and evenly sealed.

•	Apply a thin film of oil to seal the lip.

4. Install the crankshaft balancer pulley. Refer to Crankshaft Balancer Replacement .