Removal Procedure
- Remove the radio bezel. Refer to 
Radio Replacement
 .
 
- Disconnect the body control module (BCM) electrical harnesses.
 
- Remove the BCM from the instrument panel (I/P) retainer:
 
| 3.1.  | Pry the BCM tabs from the locking tabs on the underside of the restraint. | 
 
| 3.2.  | Slide the BCM out of the retainer. | 
 
Installation Procedure
- Install the BCM.
 
- Install the radio bezel. Refer to 
Radio Replacement
 .
 
- Slide the BCM tabs into the slots in the I/P retainer until the tabs lock into place.
 
- Connect the electrical connectors.
 
- Program the new or remanufactured BCM. Refer to 
Control Module References
 .