Removal Procedure
- Remove the battery tray. Refer to 
Battery Tray Replacement
 .
 
- Disconnect the wiring harness from the torque converter clutch (TCC) solenoid.
 
- Remove the TCC solenoid bolts.
 
- Remove the TCC solenoid assembly.
 
Installation Procedure
- Install the TCC solenoid assembly to the transmission case assembly.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the TCC solenoid bolts.
 
Tighten
Tighten the TCC solenoid bolts 12 N·m (106 lb in).
- Connect the wiring harness to the TCC solenoid.
 
- Install the battery tray. Refer to 
Battery Tray Replacement
 .