Removal Procedure
- Remove the HVAC module. Refer to 
HVAC Module Assembly Replacement
 .
 
- Disconnect the lower LH DTM sensor electrical connector.
 
Important: Rotate the DTM sensor counter-clockwise to disengage the sensor from the lower duct.
- Remove the lower LH DTM sensor from the HVAC module.
 
Installation Procedure
Important: Rotate the DTM sensor clockwise to engage the sensor to the lower duct.
- Install the lower LH DTM sensor to the HVAC module.
 
- Connect the lower LH DTM sensor electrical connector.
 
- Install the HVAC module. Refer to 
HVAC Module Assembly Replacement
.