Step | Action | Value(s) | Yes | No | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Hydraulic Brake Diagnostic System Check performed? | -- | ||||||||||||||
2 | Inspect the front suspension for loose or missing components. Are there any loose or missing components? | -- | ||||||||||||||
3 | Tighten, repair or replace the missing components as necessary. Refer to Fastener Tightening Specifications in Front Suspension. Is the repair complete? | - | -- | |||||||||||||
4 | Inspect the disc brake pads and brake shoe linings for the following:
Do any of the above conditions exist? | -- | ||||||||||||||
5 | Replace the brake linings. Refer to Brake Pads Replacement in Disc Brakes or Brake Shoe Replacement in Drum Brakes. Is the repair complete? | -- | -- | |||||||||||||
6 | Check the wheel assemblies for an out of balance condition. Are any of the wheel assemblies out of balance? | -- | ||||||||||||||
7 | Balance the wheel assembly. Refer to Tire and Wheel Balancing in Vibration Diagnosis and Correction. Is the repair complete? | -- | -- | |||||||||||||
8 | Verify proper brake system operation. Does the original condition still exist? | -- | Verify customer complaint. Begin the diagnosis again. Go to Step 1 | System OK |
