Step 
 | Action 
 | Normal Result(s) 
 | Abnormal Result(s)* 
 | 
1 
 | Check the master cylinder
fluid level. 
 | Master cylinder fluid level between ADD and FULL. 
 | Fill the Master Cylinder Reservoir if needed.
Refer to 
Master Cylinder Reservoir Filling 
. 
 | 
2 
 | 
- Turn ignition OFF.
 
- Park brake not applied.
 
- Start the engine.
 
 
 | Brake warning indicator illuminates briefly
then turns off. 
 | 
Brake Warning Indicator Inoperative  
 | 
3 
 | With
the vehicle in PARK, perform the brake pedal travel Test. Refer to 
Brake Pedal Travel 
. 
 | 
|     •  | Brake pedal moves steadily towards floor, approximately 2-3 in. |  
  
|     •  | Brake pedal stops and is firm against the pressure. |  
  
 | 
 | 
4 
 | Release the brake pedal. 
 | Brake pedal returns
to normal height. 
 | Brake Pedal Slow Release. Refer to 
Brake System Slow Release 
. 
 | 
5 
 | 
- Press the brake pedal.
 
- Shift vehicle into DRIVE.
 
- Perform Brake System Test. Refer to 
Brake System Testing 
.
 
 
 | 
|     •  | Braking action starts after applying the brakes. |  
  
|     •  | Brakes do not grab - brake pedal does not vibrate. |  
  
|     •  | Vehicle stops without excessive pedal effort. |  
  
|     •  | Vehicle stops without pulling to one side. |  
  
|     •  | Front and rear brakes apply evenly. |  
  
|     •  | Vehicle stops without noise coming from the brakes. |  
  
|     •  | Vehicle stops without noise coming from the Vacuum booster. |  
  
|     •  | Brakes do not drag after releasing the brake pedal. |  
  
|     •  | Brakes do not make noise while driving. |  
  
 | 
 | 
* Refer to the appropriate symptom diagnostic
table for the applicable abnormal result. 
 |