Important: The following steps must be completed before using the symptom tables.
| • | There are no DTCs set. | 
| • | The control module(s) can communicate via the serial data link. | 
| • | Inspect for aftermarket devices which could affect the operation of the Instrument Cluster or Audible Warning Systems. Refer to Checking Aftermarket Accessories in Wiring Systems. | 
| • | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. | 
| • | Inspect the reservoirs for the proper fluid level before beginning diagnosis. | 
| • | Inspect the applicable reservoir for the proper fluid level related to the indicator or message. | 
| • | Verify that the indicators work properly during the bulb check. | 
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems.
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
| • | Tachometer Inaccurate or Inoperative. Refer to Tachometer Inoperative | 
| • | Tachometer Inaccurate or Inoperative. Refer to Tachometer Inaccurate | 
| • | ABS Indicator Always On or Inoperative. Refer to Diagnostic System Check in Antilock Brake System. | 
| • | AIR BAG Indicator Always On or Inoperative. Refer to Diagnostic System Check - SIR in SIR. | 
| • | Brake Warning Indicator Always On or Inoperative. Refer to Diagnostic System Check in Hydraulic Brakes. | 
| • | SERVICE ENGINE SOON Indicator (MIL) Always On or Inoperative. Refer to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 4.3L. | 
| • | SERVICE ENGINE SOON Indicator Always On or Inoperative. Refer to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 4.8L, 5.3L, 6.0L. | 
| • | Fasten Safety Belt Indicator/Chime Always On in Seat Belts. | 
| • | Fasten Safety Belt Indicator/Chime Inoperative in Seat Belts. | 
| • | High Beam Indicator Always On in Lighting Systems. | 
| • | High Beam Indicator Inoperative in Lighting Systems. | 
| • | Turn Signal Indicators Inoperative - Left Side in Lighting Systems. | 
| • | Turn Signal Indicators Inoperative - Right Side in Lighting Systems. | 
| • | CRUSE Indicator Always On or Inoperative. Refer to Diagnostic System Check - Cruise Control in Cruse Control. | 
| • | TOW/HAUL Indicator Always On or Inoperative. Refer to Tow/Haul Switch/Indicator Always On or Inoperative in Automatic Transmission - 4L60E. | 
| • | TOW/HAUL Indicator Always On or Inoperative. Refer to Tow/Haul Switch/Indicator Always On or Inoperative in Automatic Transmission - 4L60E. | 
| • | TOW/HAUL Indicator Always On or Inoperative. Refer to Tow/Haul Switch/Indicator Always On or Inoperative in Automatic Transmission - 4L80E. | 
| • | 4WD Indicator Always On. Refer to Four-Wheel Drive Indicator Does Not Turn Off in Automatic Transfer Case. | 
| • | 4WD Indicator Inoperative. Refer to Four-Wheel Drive Indicator Does Not Light in Automatic Transfer Case. | 
| • | CHECK COOLANT TEMP Message Always On or Inoperative. Refer to Engine Overheating | 
| in Engine Cooling. | 
| • | ENGINE OVERHEATED Message Always On or Inoperative. Refer to Engine Overheating in Engine Cooling. | 
| • | LOW COOLANT Message Always On or Inoperative. Refer to Low Engine Coolant Level Indicator Diagnosis | 
| in Engine Controls - 4.3L | 
| • | LOW COOLANT Message Always On or Inoperative. Refer to Engine Coolant Level Switch/Sensor Diagnosis in Engine Controls - 4.8L, 5.3L and 6.0L. | 
| • | LOW WASHER FLUID Message Always On in Wipers/Washers System. | 
| • | LOW WASHER FLUID Message Inoperative in Wipers/Washers System. | 
| • | BATTERY Message Always ON. Refer to Battery Charge Indicator Always On in Engine Electrical. | 
| • | BATTERY Message Inoperative. Refer to Battery Charge Indicator Inoperative in Engine Electrical. | 
| • | CARGO DOOR AJAR Message Always ON. Refer to Body Rear End. | 
| • | CARGO DOOR AJAR Inoperative. Refer to Body Rear End. | 
| • | CARGO LAMP ON Message Inoperative in Lighting Systems. | 
| • | CARGO LAMP ON Message Always On in Lighting Systems. | 
| • | SECURITY Message Always On or Inoperative. Refer to Diagnostic System Check - Theft Deterrent in Theft Deterrent. | 
| • | SERVICE 4WD Message Always On or Inoperative. Refer to Diagnostic System Check in Automatic Transfer Case - NVG 246. | 
| • | SERVICE 4WD Message Always On or Inoperative. Refer to Diagnostic System Check in Automatic Transfer Case - NVG 261. | 
| • | SERVICE RIDE CONTROL Message Always ON. Refer to SERVICE RIDE CONTROL Message Always On in Real Time Damping - RTD. | 
| • | SERVICE RIDE CONTROL Message Inoperative. Refer to SERVICE RIDE CONTROL Message Inoperative in Real Time Damping - RTD. | 
| • | Instrument Cluster Illumination Lamps Inoperative in Lighting Systems. | 
| • | Instrument Panel Lamps Do Not Dim in Lighting Systems. |