Removal Procedure
- Drain the fuel from the filter assembly. Refer to 
Water-in-Fuel Draining
 .
 
- Disconnect the fuel lines from the filter assembly.
 
- Disconnect the electrical connectors.
 
- Remove the primary fuel from the bracket.
 
- Remove the primary filter-to-bracket bolts.
 
- Remove the primary filter assembly.
 
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the primary filter assembly.
 
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Connect the electrical connectors.
 
- Connect the fuel lines.
 
- Prime the fuel system. Refer to 
Primary Fuel Filter Replacement
.
 
- Start the vehicle and inspect for leaks.