Rear Compartment Lid Lock Cylinder Replacement Impala

1. Remove the rear compartment lid applique. Refer to Rear Compartment Lid Applique Replacement .
2. Drill out the 2 rivets from the rear compartment lock cylinder.
3. Remove the rear compartment lock cylinder and gasket from the rear compartment lid.

1. Align the lock cylinder shaft to the rear compartment lid latch.
2. Align the rear compartment lock cylinder and gasket to the holes in the rear compartment lid, and press in until fully seated.
3. Install the rear compartment lock cylinder and gasket to the rear compartment lid using 2 rivets.
4. Install the rear compartment lid applique. Refer to Rear Compartment Lid Applique Replacement .

Rear Compartment Lid Lock Cylinder Replacement Monte Carlo

1. Open the rear compartment.
2. Remove the lock cylinder retainer from the rear compartment lock cylinder by pulling off.



3. Remove the rear compartment lock cylinder, lock cylinder retainer and gasket from the rear compartment lid.

1. Align the lock cylinder shaft to the rear compartment lid latch.
2. Align the rear compartment lock cylinder and gasket to the lock cylinder hole in the rear compartment lid, and press in until fully seated.



3. Install the lock cylinder retainer to the rear compartment lock cylinder by pressing into place until fully seated.
4. Close the rear compartment.